supertab S7G firmware krc 1032 20171013

 

                           اقدم لكم فلاشة

 

supertab S7G الإصدار _20171013 مسحوبة بواسطة بوكس CM2

الفلاشة مسحوبة من طرفي 

معلومات السحب متوفرة داخل الملفات 

Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back

2. Press and hold 'VolumeUp' and 'VolumeDown' keys

 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 

3. Insert cable

 ====  Wait for phone...

Phone found! [ 7 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

PickUp loaders from pac

FDL Ready!

Boot Ver : Spreadtrum Boot Block version 1.1

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ... 

Model Name  : sp7731gea_hdplus_dt

Model Brand : SuperTab

Model Device: scx35_sp7731gea_hd

AndrVersion : 5.1

BaseBand CPU: SP7731GEA_HD

CompileDate : 10/13/2017 10:36:33 AM

Project Ver : s706a_cuser_20171013

Model Ext   : SuperTabS7G

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:19

Reconnect Power/Cable!

معلومات تحويل الصيغة 

SuperTabS7G

Chinese Miracle II  [SPD module] v 1.27

Operation : Convert InfinitySC to SPRD PAC [ v1.27 ]

Target : SP7731GEA_HD_scx35_sp7731gea_hd_5.1_s706a_cuser_20171013_SuperTabS7G

Step  #1 : Identify

MEMORY : eMMC

LAYOUT : eMMC NORMAL

Step  #2 : Select logic

Select Logic : SC7731

Step  #3 : Processing data

Build PAC

[ADD FILE] : nvitem_w.bin

[ADD FILE] : nvitem_wcn.bin

[ADD FILE] : prodnv.img

[ADD FILE] : u-boot-spl-16k.bin

[ADD FILE] : sc7731g_CP0_modem.bin

[ADD FILE] : DSP_DM_Gx.bin

[ADD FILE] : sc8830g_modem_CP2_WCN_14D_W15.26.2_Release.bin

[ADD FILE] : logo_1024x600.bin

[ADD FILE] : fblogo_800x1280.bin

[ADD FILE] : boot.img

[ADD FILE] : system.img

[ADD FILE] : cache.img

[ADD FILE] : recovery.img

[ADD FILE] : userdata.img

[ADD FILE] : u-boot.bin

Build Ok! Result : 0x0017

Sign PAC ... 

Sign Ok! FW compiled!

Elapsed: 00:00:19

Saved to : SP7731GEA_HD_scx35_sp7731gea_hd_5.1_s706a_cuser_20171013_SuperTabS7G.pac

Done!

الرابط للملف بصيغة pac

الرابط للملف

FIRST CLONE Samsung S9 cm2 readed firmware here

CLONE Samsung S9 cm2 readed firmware here

Chinese Miracle II  [MTK module] v 1.58

Start  at : [11/24/2018 / 12:51:54 PM]

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 162 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6580

BB_CPU_NME : [MediaTek] MT6580_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x94

NAND Flash : NOT INSTALLED

eMMC Flash : FE014E50314A39354C12AD9DC8EEA10B

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0xFE , OEM : 014E

[eMMC] : FLASH_INF : [MICRON] , L59J1

[eMMC] : FLASH_CID : FE014E50314A39354C12AD9DC8EEA10B

[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000

[eMMC] : FLASH_LEN : 0x00000001D3000000

[eMMC] : FLASH_UCP : 7472 MiB [eMMC 8 GiB]

DEV RID    : 0xDC77118B6D14DF7699F489DECFDE91D7

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : samsung

ProdName  : dream2qltesq

ProdModel : SM-G960F

Device    : dream2qltesq

AndroidVer: 7.0

MTKxCPU   : MT6580

MTKxPRJ   : alps-mp-m0.mp1-V2.34_hexing6580.we.m_P15

[Read Ok] : preloader_s305_8p_hdp.bin

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : logo.bin

[Read Ok] : secro.img

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / s305_8p_hdp / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 2106 MiB

Scatter saved to : C:\Users\AnonDz\Documents\MT6580__samsung__SM-G960F__dream2qltesq__7.0__alps-mp-m0.mp1-V2.34_hexing6580.we.m_P15\

All done!

Done!

Elapsed: 00:08:23

Reconnect Power/Cable!

DOWNLOAD LINK HERE 

HOW TO ROOT LG G5 T-MOBILE H830

Hi guys today i am bringing you a successful  method to root lg h830 and install TWRP recoveryI didnt have much luck with the Easy Recowvery method on my G5 (20A) first of all you need to download the needed files from here

the files neede are 

dirtycow

recowvery-app_process64

recowvery-applypatch

recowvery-run-as

twrp.img

once in cmd window from your recowvery folder follow these steps:
---
adb push dirtycow /data/local/tmp
adb push recowvery-applypatch /data/local/tmp
adb push recowvery-app_process64 /data/local/tmp
adb push recowvery-run-as /data/local/tmp

adb shell

$ cd /data/local/tmp
$ chmod 0777 *
$ ./dirtycow /system/bin/applypatch recowvery-applypatch
"<wait for completion>"
$ ./dirtycow /system/bin/app_process64 recowvery-app_process64
"<wait for completion, your phone will look like it's crashing>"
$ exit

adb logcat -s recowvery
"<wait for it to tell you it was successful>"
"[CTRL+C]"

adb shell reboot recovery
"<wait for phone to boot up again, your recovery will be reflashed to stock>"

adb shell

$ getenforce
"<it should say Permissive, adjust source and build for your device!>"

$ cd /data/local/tmp
$ ./dirtycow /system/bin/run-as recowvery-run-as
$ run-as exec ./recowvery-applypatch boot
"<wait for it to flash your boot image this time>"

$ run-as su

adb push twrp.img /sdcard/twrp.img
adb shell

run-as exec dd if=/sdcard/twrp.img of=/dev/block/bootdevice/by-name/recovery
"<wait for it to complete>"
$ reboot recovery

FOR INSTALLING SUPER SU YOU NEED TO USE EasyRecowvery-1.3b3 TO INSTALL SUPERSU OPEN EasyRecowvery.cmd AND USE OPTION 03 AND YOURE DONE AFTER REBOOT

New IRIS G7050 FIRMWARE

THE NEW IRIS G7050 FIRMWARE DUMPED WITH INFINITYBOX CM2MTK

AND THIS THE DUMP LOG 

peration : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 4E03018864726143CBA34320FB555681
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E436172642043A3CB815693FB
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID    : 0xDC77118BBE6D070182A36A39EE9EAD8B
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : alps
ProdName  : full_elink8735b_6tb_m
ProdModel : G7050
Device    : elink8735b_6tb_m
AndroidVer: 6.0
MTKxCPU   : MT6737M
MTKxPRJ   : alps-mp-m0.mp1-V2.56.3_elink8735b.6tb.m

[Read Ok] : preloader_elink8735b_6tb_m.bin
[Read Ok] : lk.bin
[Read Ok] : items.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6737M / V1.1.2 / elink8735b_6tb_m / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2528 MiB
Scatter saved to : C:\MT6737M__alps__G7050__elink8735b_6tb_m__6.0__alps-mp-m0.mp1-V2.56.3_elink8735b.6tb.m\

All done!

Done!
Elapsed: 00:06:38
Reconnect Power/Cable!

DOWNLOAD LINK HERE

J330F/FN/G/cert file SM-J330F_353505090118879

Samsung j330F/FN/G cert file for sale SM-J330F_353505090118879
                                                              SM-J330FN_353505090190738
                                                              SM-J330FN_358875089853553
for 5 usd contact at anondz1221@gmail.com

new iris vox fortis firmware 100% working

New Iris Vox Fortis 

hi guys i've wanted to share with you this new firmware iris vox fortis dumped by me with infinity 

i have it uploaded  on mega and this is the link i hope you like it

bypass samsung a510f frp 7.0 100% working

A 5 2016 (A510F) 7.0 NOUGAT DONE BY Z3X IN DOWNLOAD MODE.

1- FLASH THIS FILE A510f sboot WITH ODIN

2- PUT IT IN DOWNLOAD MODE

3- SELECT J700H IN Z3X
4- activate developper mode and activate oem
5- factory reset the phone and thats it done .
good luck for everyone